While we were off at NVIDIA’s GTC 2012 conference seeing NVIDIA’s latest professional products, NVIDIA’s GeForce group was busy with some launches of their own. The company has quietly launched the GeForce GT 610, GT 620, and GT 630 into the retail market. Unfortunately these are not the Kepler GeForce cards you were probably looking for.

As NVIDIA was already reusing Fermi GPUs for GeForce 600 series parts for the OEM laptop and desktop market, it was only a matter of time until this came over to the retail market, and that’s exactly what has happened. The GT 610, GT 620, and GT 630 are all based on Fermi GPUs, and in fact 2 of them are straight-up rebadges of existing GeForce 400 and 500 series cards. Worse, they’re not even consistent with their OEM counterparts – the OEM GT 620 and GT 630 are based off of different chips and specs entirely.

At the bottom of the 600 series retail stack is the GeForce GT 610, which is a rebadge of the GT 520. This means it’s either a GF119 GPU or cut-down GF108 GPU featuring a meager 48 CUDA Cores and a 64bit memory bus, albeit with a low 29W TDP as a result. This is truly a rock bottom card meant to be a cheap as possible upgrade for older computers, as even an Ivy Bridge HD4000 iGPU should be able to handily surpass it.

The second card is the GT 620, which is a variant of the OEM-only GT 530. With 96 CUDA cores we’re not 100% sure that this is GF108 as opposed to the 28nm GK117, but as NVIDIA currently has a 28nm capacity bottleneck we can’t see them placing valuable 28nm chips in low-end retail cards. Furthermore the 49W TDP perfectly matches the GF108 based GT 530. Compared to the OEM GT 620 the retail model has twice as many CUDA cores, so it has twice as much shader performance on paper, but because of the 64bit memory bus it’s going to be significantly memory bandwidth starved.

The final new 600 series card is the GT 630, which is a rebadge of the GT 440. Like the GT 440 this card comes in two variants, a model with DDR3 and a model with GDDR5. Both models are based on GF108 and have all 96 CUDA cores enabled, and have the same core clock of 810MHz. At the same time this is going to be the card that deviates from its OEM counterpart the most. The OEM GT 630 was a Kepler GK107 card, so this rules out getting a Kepler based GT 630 retail card any time in the near future.

As always, rebadging doesn’t suddenly make a good card bad – or vice versa – but it’s disappointing to once again see this mess transition over to the retail market. We hold to our belief that previous generation products are perfectly acceptable as they were, and that the desire to have yearly product numbers in an industry that is approaching 2 year product cycles is silly at its best, and confusing at its worst.

We have already reviewed quite a few PC Power & Cooling products on AnandTech, but this time we will be looking at their first series with modular cables and a white case. In contrast to older PSUs PC Power & Cooling delivered, this one provides a 120mm fan for cooling as well. The new Silencer MK III models are available in 400, 500 and 600W only. This is a good news for everybody who is interested in small power supplies as they deliver more than enough power for any common PC with one graphics card.

PC Power & Cooling uses Japanese capacitors, one powerful +12V output, a ball bearing fan from ADDA , and a partially modular cable management. With 80 Plus Bronze certification, the Silencer MK III seems to be an average product, but Seasonic is the company behind these products—and they're definitely a good choice. What about the internal design and components? On the following pages we will see if they meet one's expectations.

OCZ has added a low profile version of the Vertex 3 to their SSD portfolio. The drive has a height of 7mm, which is 2.5mm slimmer than most 2.5" drives are. Other specifications match the regular Vertex 3, so reading our Vertex 3 review will give you an idea of the performance, but below is a specification table in case you don't remember the main details off hand:

A Canadian retailer, Canada Computers, is already listing the low profile versions and pricing appears to be slightly higher compared to normal Vertex 3. However, Canada Computers has not received any stock yet so the prices may not be final yet. Availability is unknown as of now but expect to see these SSDs in stores within a week or two.

We are definitely experiencing a shift towards smaller form factors in storage devices and computing in general. Especially Intel's Ultrabook project is fuel for the fire because in order to meet Intel's strict dimension limitations, it's necessary to use either mSATA SSDs or thinner 2.5" SSDs/HDDs. On top of that, the internal components of SSDs don't usually even need the extra 2.5mm and making a drive 7mm instead of 9.5mm is only a matter of shaving off some of the chassis. I'll give you a sneak preview of our Plextor M3 Pro review to demonstrate this:

Plextor M3 - 9.5mm tall

Plextor M3 Pro - 7mm tall

Both SSDs have exactly the same PCBs and the only thing that makes the M3 Pro thinner is the fact that it has thinner thermal pads. What this means is that pretty much any 2.5" SSD could be turned into a 7mm model without even modifying the PCB.

I would like to see more hybrid approaches like what Intel is doing, though. Hybrid in this case means that there's a riser attached by screws that turns a 7mm SSD into a 9.5mm SSD. Some laptops are designed for 9.5mm drives and a 7mm drive might jiggle inside the laptop.

Example of the use of a riser

Having a riser means the user doesn't need to decide between 7mm and 9.5mm as you can easily remove the riser if you need to fit drive inside a computer that only takes 7mm drives. Of course, offering 7mm and 9.5mm drives like OCZ and Plextor are doing is better than offering only 9.5mm drives, but using a riser still looks like the best option.

When Alienware announced the Ivy Bridge refresh for its gaming notebook lineup, one model was conspicuously absent. Word filtered out that the smallest member of the range, the 11.6” M11x, would not be refreshed and that Dell was preparing to discontinue the line. For ultramobile gamers, the loss of the M11x is a huge blow, because it was one of the more unique notebooks out there—a near ultraportable with legitimate gaming aspirations, backed up by gaming performance that lit the class standards on fire. It was a truly standout notebook, and it will be sorely missed.

But now, a spiritual successor emerges in the form of Clevo’s W110ER. We have this unit courtesy of Eurocom, who are calling it the Monster 1.0, but other boutiques selling the W110ER include AVADirect, OriginPC, Sager, and XoticPC amongst others. We typically see this with larger notebooks from Clevo and Compal, but it hasn’t been as prominent with smaller notebooks until now, with the exception of some ASUS models from years past.

The W110ER spec sheet actually reads like a pipe dream, something that you would come up with if things like thermal limits didn’t exist. The performance-class GPU is present and accounted for—Clevo ships every W110ER whitebook with a Kepler-based GT 650M (2GB DDR3, 384 CUDA cores, Optimus). But the most impressive thing here is that the W110ER has support for Intel’s new IVB 35W quad-core CPUs. Yeah seriously, a quad-core 11.6” notebook. Just to refresh your memory, the M11x made use of Intel’s low voltage dual-core parts, so this is a significant step up in CPU performance. It’s a ridiculous amount of performance stuffed into a tiny notebook. Interested? Read on.

Corsair has had an excellent run as a case designer, showing growth with each new enclosure by adding some features, subtracting other ones, moving things around, and generally continuing to experiment. The Obsidian and Carbide lines in particular have shown healthy progress, but today Corsair launches a fourth line under their popular Vengeance gaming brand: the Vengeance C70.

While the exteriors of the Obsidian and to a lesser extent Carbide cases have all been fairly austere, the Vengeance C70's target is pretty clear: they're going after gamers. Thus far, products in the Vengeance market have generally been of high quality and haven't been particularly ostentatious, but the C70's external design is an unusual step for Corsair. Is the C70 as a whole part of Corsair's continued evolution as a case designer, or is this their first major misstep along the way?

We’re here at NVIDIA’s GPU Technology Conference (GTC) 2012, where NVIDIA is holding their semi-annual professional developers conference. There’s been a great deal announced that will take a few days to completely go over, but for now we wanted to start on the product side with NVIDIA’s major product announcements.  With the launch of GK104 back in March NVIDIA is now ready to start rolling out some of their professional productions, and while the next generation of Quadro is not yet ready, Tesla is another matter. This brings us to our first part of our GTC coverage: the next generation of Tesla cards, Tesla K10 and Tesla K20.

It’s been a couple weeks since Intel officially unveiled Ivy Bridge, and we continue to see plenty of product announcements from the major OEMs. Yesterday, while we were busy writing about AMD’s Trinity APU, Lenovo fired off a barrage of new mobile devices. Whether you’re looking for laptops, notebooks, tablets, or ultrabooks, chances are Lenovo has a new product for your consideration.

Gallery: Lenovo X1 Carbon

Starting with the ultrabook side of things, the flashiest device in the lineup is the new ThinkPad X1 Carbon. As the name implies, the X1 has a carbon fiber rollcage that allows Lenovo to create a durable ultrabook without sacrificing weight. Lenovo claims this is the “world’s thinnest and lightest 14-inch ultrabook” and we see no reason to doubt the claim. Other interesting features include RapidCharge that allows the laptop to recharge to over 80% battery capacity in 30 minutes, a backlit keyboard, and a full 180 degree hinge. The X1 Carbon is a business class ultrabook, so it comes with Intel vPro technology for manageability, fingerprint scanner, and optional 3G mobile broadband. Lenovo didn’t provide any specifications yet, but we’ve heard elsewhere that the X1 Carbon will feature a 1600x900 LCD. We haven’t had a chance to test the laptop in person, but hopefully Lenovo can also do something about the keyboard experience on ultrabooks, as to date we’ve found that most of them have little if any key travel—a consequence of the thin form factor, unfortunately. Availability is planned for “this summer”, which is a bit nebulous, so if you’re interested in the X1 Carbon you’ll have to wait a bit longer before pulling the trigger.

The remainder of the lineup consists of the usual updates to their product stack. The ThinkPad L, T, W and X Series are all receiving upgrades to allow for Ivy Bridge—3rd Generation Intel Core processors. Common features across the lineup include mobile broadband, docking stations, RapidBoot, Dolby audio, and Lenovo’s ThinkPad Precision Keyboard (with backlit and/or ThinkLight options).

Gallery: Lenovo L430 and L530

Starting with the L-Series, the L430 and L530 both support the same general set of hardware. Besides Ivy Bridge CPUs (Lenovo didn’t provide a list, but we’d assume it will be the dual-core range of processors), you can choose between several HDD/SSD configurations—including a 32GB mSATA caching SSD if you forego WWAN support—up to 8GB RAM, and either 1366x768 or 1600x900 LCDs. The L430 also has an optional NVIDIA Quadro NVS 5400M 1GB GPU upgrade available, with Optimus Technology; judging by our initial testing of HD 4000, the NVS 5400M should still boost graphics performance by roughly 2X.

Expansion ports consist of a single USB 3.0, three USB 2.0 (one always powered), Express Card 54mm, Gigabit Ethernet, and a flash card reader (SD/SDHC/SDXC/MMC). VGA and mini-DisplayPort outputs are present, along with a single headphone/microphone jack. You can also equip either laptop with the standard 6-cell battery (up to 8 hours battery life) or an extended capacity 9-cell (up to 13.5 hours battery life), and both come with optical drives. The L430 measures 13.94” x 9.57” x 1.17-1.24” (354mm x 243mm x 29.6-31.4mm) and weighs 5.0 lbs. (2.27kg) with the 6-cell battery, while the L530 measures 14.96” x 9.72” x 1.25-1.31” (380mm x 247mm x 31.7-33.4mm) and starts at 5.4 lbs. (2.45kg) with the 6-cell battery. Pricing should starts at around $879, with availability in early June.

Gallery: Lenovo T430, T430s, and T530

The T-Series is the workhorse of Lenovo’s ThinkPad lineup, with higher quality build materials (e.g. magnesium alloy rollcages) and higher performance components, along with support for up to 16GB RAM. Most of the options are similar to the L-Series, but the T430 and T530 add support for an optional battery slice (up to 32.5 hours of battery life on the T430, or 30 hours on the T530!) while the T430s supports only 4-cell and 6-cell batteries but adds the option for a bay battery (e.g. in place of the optical drive). Storage options on all three models include Opal FDE (Full Disc Encryption), on either hard drives or SSDs—or you can still go with a normal HDD/SSD. The T530 is also available with a second HDD in place of the optical drive. NVIDIA Optimus switchable graphics is available on all models; only the T430s explicitly mentions the NVS 5400M, though we suspect the others will use the same GPU. The T430/T430s both feature 1366x768 or 1600x900 LCDs, while the T530 includes the two lower resolutions along with a high quality 95% gamut 1920x1080 panel.

In terms of expansion ports, the laptops have two USB 3.0 ports, two USB 2.0 ports (one configurable as always on), VGA, mini-DisplayPort, a flash reader, and an optional Smart Card reader; the T430/T530 also add an Express Card 34mm slot. The T430s is the lightest and slimmest of the trio, starting at 3.94 lbs. (1.79kg) and measuring 13.50” x 9.05” x 0.83”-1.02” (343mm x 230mm x 21.2mm-26mm. The T430 is slightly larger/heavier, starting at 4.77 lbs. (2.17kg) and 13.8” x 9.13” x 1.18” (350.5mm x 232mm x 29.9mm) while the T530 tips the scales at 5.56 lbs. (2.5kg) and measures 9.65” x 14.68” x 1.25”-1.40” (245.1mm x 372.8mm x 31.8-35.6mm). Availability is again early June, with the T430 and T530 starting at around $879, the T430s starting at $1399.

Gallery: Lenovo ThinkPad W530

The W530 is the mobile workstation upgrade to the T530, with identical dimensions (9.65” x 14.68” x 1.25”-1.40” / 245.1mm x 372.8mm x 31.8-35.6mm) but a slightly higher starting weight of 5.95 lbs. (2.7kg). Nearly all of the options are the same, but the W530 adds support for up to 32GB RAM and the graphics get boosted from Quadro NVS to full-blown Quadro cards. Lenovo lists the Quadro K1000 and K2000 as options, which are presumably the Kepler-based replacements for the Fermi 1000M/2000M; the cards are so new that we can’t even find specs on NVIDIA’s site right now! The W530 has the same display options as the T530, and about the only other difference immediately apparent is the addition of a slightly higher capacity 62Wh 6-cell battery with a 3-year warranty (instead of the 1-year warranty 57Wh battery). Pricing for the W530 starts at approximately $1529, with availability again in early June.

Gallery: Lenovo ThinkPad X230 and X230t

Wrapping things up we have the X-Series, with the X230 and X230t. The X230 is a traditional ultraportable while the X230t takes many of the elements but mixes things up to become a convertible tablet. Both models feature 12.5” IPS displays, though there’s a non-IPS panel available on the X230; the X230t comes standard with a multitouch panel but has the option for a pen-only direct-bonded Gorilla Glass display. The storage department again has a variety of HDD and SSD options, including 32GB SSD caching and FDE solutions, and despite the small size there’s still an optical drive present in the UltraBase. Battery options on the X230 cover the gamut, with 4-cell (29Wh), 6-cell (63Wh), 9-cell (94Wh), and an optional 6-cell (57Wh) slice—you can get up to 24.9 hours with the 9-cell and slice. The X230t uses different batteries, with a 6-cell (29Wh) standard or a 9-cell (62Wh) upgrade, along with a slim external battery pack (157Wh) that can provide up to 18 hours of mobility.

Expansion ports include two USB 3.0 ports, one always on USB 2.0 port, flash reader, VGA, mini-DisplayPort, Express Card 54, and optional Smart Card reader. The X230 isn’t quite an ultrabook as it’s a bit too thick, measuring 12.01” x 8.13” x 0.75”-1.05” (305mm x 206.5mm x 19-26.6mm); it weighs 2.96 lbs (1.34kg), presumably with the default 4-cell battery. The X230t is slightly bulkier to accommodate the rotating hinge, and it measures 12” x 9” x 1.06”-1.23” (305.0mm x 228.7mm x 27.0-31.3mm) and weighs 3.67 lbs. (1.66kg). As you would expect, neither ultraportable comes cheap, with the X230 starting at around $1179 and the X230t bumping that up $300 to $1479, and both are set to arrive in June.

Besides the laptops, Lenovo also offers their updated ThinkPad Series 3/USB 3.0 Dock. As the name implies, the dock now features USB 3.0 support—five SuperSpeed ports to be precise.  It also comes with dual “beyond-HD” video outputs, though no mention is made of whether they’re DisplayPort, dual-link DVI, or something else. Also present is Gigabit Ethernet and always-on mobile device charging, thanks to the separate AC power.

Earlier this year at Mobile World Congress, NVIDIA and Sega announced Sonic 4: Episode II would be coming to TegraZone in an optimized version for NVIDIA's Tegra 3 hardware. Today the promise became reality as the $6.99 game is now available via NVIDIA's TegraZone on Tegra 3 devices. The timing alone is pretty special. While the Xbox Live Arcade version of the game debuted yesterday, the iOS version won't come out for another day and the standard Android build will take another month. NVIDIA's ability to pull even small day long exclusives over iOS is still impressive in a world where many game developers put no one ahead of Apple.

The final game seems a lot like what we played at MWC in February. It works on all Tegra 3 devices using either on-screen touch controls or an external gamepad. The gameplay is distinctly Sonic, although I'll admit my fondness for the platformer peaked years ago. The single player game has you controlling Sonic with an AI controlled Tails. Also included is a multiplayer mode that allows for co-operative play over Bluetooth. The game looks good on Tegra 3. We've been running a preview APK on some as of yet unreleased hardware so I won't comment on performance just yet.

NVIDIA promises better visuals in the Tegra 3 version of the game than the standard Android version due out in the coming weeks. While we don't have the standard Android build, NVIDIA sent along some screenshots to show the difference in image quality.

Gallery: Sonic 4: Episode II Now Available for Tegra 3

We've had a few boutiques come through here, but what V3 Gaming PC wanted to approach us with was something different than we're used to seeing. Many of the systems sent through here are aggressively tuned, designed for performance at virtually any cost. It looks fantastic on charts, but in practice you're often paying out the nose for a system that left the price-performance curve eating the dust in its speedy wake. With the Avenger, V3 wanted to do something a little different.

What we have in house today is a system they believe has been designed to be as balanced a build as possible. High performance, sure, but more well-rounded and suited for a variety of tasks without blowing up the room temperature or the power bill in the process. The reasons behind some of the decisions they've made are laudable, but some of the others may be somewhat more nebulous. Read on for our analysis of the Avenger.

We're at Broadcom and Netgear's joint press event today, where both are announcing the commercial availability of the R6300 three spatial stream 802.11ac router which was announced at CES, and two new products: the two stream R6200 router and A6200 USB 2.0 adapter. 

As a reminder, the previously announced R6300 supports 802.11ac at speeds of 1300 Mbps by utilizing 80 MHz channels on 5 GHz, 256QAM, and three spatial streams. That particular router rounds out Netgear's high-end 802.11ac offering with Broadcom's solution inside. The news today is Netgear's mid-range product, the R6200, which includes 2 spatial streams and an 867 Mbps maximum bitrate. The R6200 one USB 2.0 port compared to the R6300's two, for file and printer sharing.

Gallery: Netgear R6200, R6300, A6200

Although MiniPCI Express 802.11ac adapters are coming for notebooks, those wishing to upgrade devices immediately can use the A6200 two-stream USB 2.0 adapter. The USB 2.0 adapter is built around Broadcom's BCM43526 solution. It's unfortunate the adapter isn't USB 3.0, given USB 2.0's 480 Mbps theoretical throughput limit, however BCM43526 only has a USB 2.0 host interface onboard. I'm told that Broadcom has a future USB 3.0 802.11ac solution for those wanting to see higher transfer rates not clamped by USB 2.0. 

The R6300 will be available on online retailers starting tomorrow. Netgear expects the rest of the products to be available on store shelves by the end of the week. Pricing for the R6300 will be $199.99, and $179.99 for the R6200, and $69.99 for the A6200 adapter. 

Update: We asked for more details about the SoC and WLAN controllers inside both the R6x00 series, and learned exactly what we wanted to know. Inside the R6300 is a BCM4706 for routing and 2.4 GHz 3x3:3, alongside the expected BCM4360 802.11ac 3-stream controller. The R6200 moves one tier down to the BCM4518 for 2x2:2 on 2.4 GHz, and a BCM4352 for 2-stream 802.11ac. This is exactly the combination that we suspected for the devices, but now have confirmed them with Netgear. In addition, the shipping firmware doesn't include beamforming, but will enable it in a software update soon after launch.